Mechanical Testing Instruments

Technosys provides the mechanical testing instruments for the estimation - Hardness, Tensile, Bending, Impact, etc…

HOME  /  PRODUCTS  /  MECHANICAL TESTINGS
Quasar 2.5

Quasar 2.5

Model Quasar 2.5
Capacity 2.5 kN
Type Single Column, Table Top
Min. Speed 0.01mm / min
Max. Speed 1000 mm / min
Application Plastics, Polymers
Accuracy ASTM E4 - EN 10002/2 - DIN 51221
Quasar 5 / Quasar 10 / Quasar 25 / Quasar 50 / Quasar 100

Quasar 5 / Quasar 10 / Quasar 25 / Quasar 50 / Quasar 100

Model Quasar 5 / Quasar 10 / Quasar 25 / Quasar 50 / Quasar 100
Capacity 5 kN / 10 kN / 25 kN / 50 kN / 100 kN
Type Double Column, Table Top
Min. Speed 0.0005mm / min
Max. Speed 500 mm / min - for Quasar 5 / Quasar 10 / Quasar 25 / Quasar 50 • 400 mm / min - for Quasar 100
Application Textile, Plastics, Polymers, Composites, Sheet Metal
Accuracy ASTM E4 - EN 10002/2 - DIN 51221
Quasar 250 / Quasar 400 / Quasar 500 / Quasar 600 / Quasar 1000 / Quasar 1200 / Quasar 2000

Quasar 250 / Quasar 400 / Quasar 500 / Quasar 600 / Quasar 1000 / Quasar 1200 /  Quasar 2000

Model Quasar 250 / Quasar 400 / Quasar 500 / Quasar 600 / Quasar 1000 / Quasar 1200 / Quasar 2000
Capacity 250 kN / 400 kN / 500 kN / 600 kN / 1000 kN / 1200 kN / 2000 kN
Type Double Column, Floor Standing
Min. Speed 0.0005mm / min
Max. Speed 500 mm / min - for Quasar 250 • 200 mm / min - for Quasar 400 / Quasar 500 / Quasar 600 / Quasar 1000 / Quasar 1200 / Quasar 2000
Application Metallurgy
Accuracy ASTM E4 - EN 10002/2 - DIN 51221

Control Software for UTM :

User-friendly with Exhaustive Features
Powerful Help WIZARD - includes package of methods pre-made according to ASTM / ISO / DIN standards for different types of materials
Open & Flexible Architecture - allows custom-built test methods, process the results and test certificates
Impact Pendulum Tester

Impact Pendulum Tester

A complete range of impact pendulum testers covers nominal energy of 150-450 J, 600 J and 750 J, following both Charpy and Izod methods.
An important feature is the motorized automatic lifting of the hammer after any test to optimize cycle times, which is useful for low temperature tests.
In this way the operator can control all programming and testing features. A variety of specimen-preparation machines, thermostatic chambers, instrumented knives and many useful accessories for instrument set-up are available on customer request.